CK5112 lathe is CNC single-column vertical lathe aimed at
processing inner round and outer round of large workpiece and
plane. The lathe is suitable for high-speed steel and hard alloy
steel cutter, processing black metal, non-ferrous metal and some
non-metallic materials.The following process can be finished with
the lathe: rough and fine turning of the inner and outer cylinder,
plane and conical surface, grooving, severing and simple surface.
The CNC lathe type CK5112 is a super rigid machine with big
machining capacities, stable and rigid structure, heavy job load
and high machining efficiency.
AC inverter motor is used to achieve speed change.
Gears are made of 40 Cr steel and precision ground for high
precision and low machine noise.
Workbench adopts hydrostatic guideway. Guide sliding surface pastes
The machines are designed and built to meet modern machining
requirements of high speed cutting tools and carbide cutters on
workpieces of ferrous, non-ferrous, composite and other materials.
Machine Main Structure:
The stand columns are divided into two main and auxiliary rails at
left and right. The machine can be more stable at run time, more
rigid when strong cutting because the span between the main and the
auxiliary guide rail becomes large and 55 degrees forked tail on
one side of the main rail can be oriented.
2. The main drive system:
The main transmission gets power from 30KW three-phase asynchronous
machine or continuous current dynamo.
3. Workbench part:
The workbench part is constituted by the workbench, main spindle
and workbench base. The worktable rotation and load-bearing consist
of hydrostatic slideway and two sets of 3,182,100 series bearings.
The ball screw, planetary reducer, servo motor in the crossbar
constitute the left and right feeding system. The movement of the
beam in the column is oriented by 55 degrees guide rail and platen.
5. Vertical Turret:
Vertical turret is composited with the rotary slide, ram, ball
screw, planetary gear and servo motor.
Max. turning diameter
fast moving speed of knife rest(X axis Z axis)
Max. height of workpiece
Level travel of vertical slide
Max. height of workpiece
Feeding series of knife rest(X axis Z axis)
Feeding range of knife rest(X axis Z axis)
Workbench speed series
16 step/two gears no step
Section height of knife carrier
Workbench speed range
Feeding alternating servomotor torque
Max. workbench torque
Main motor power
Beam movement speed
Max. cutting force of knife rest
Beam lifting motor power
RAM travel of vertical slide
Note:The height of the vertical lathe can be manufactured according to
the user's requirements. The specific parameters refer to the
contracts and technological agreements when ordering.